Oil Service Schedule

  • Replace engine oil and filter.
  • Re-set tyre pressures.
  • Top up under bonnet levels.
  • Check exterior lighting and replace bulbs as necessary.
  • Brief visual of undercar to identify any obvious defects.
  • Check wiper blade condition & washer operation, replace and adjust nozzles as necessary.
  • Stamp service booklet and re-set oil service indicator.
  • Test drive, re- inspect under bonnet levels and under car for any leaks or faults.

Inspection 1 Service Schedule

  • Inspect service booklet for replacements due ie: filters, timing belts etc
  • Replace engine oil and filter
  • Rotate wheels, re-set tyre pressures including spare & clean wheels
  • Clean down and inspect brake linings for percentage remaining and brake hose condition
  • Measure rotor thickness and report . Clean & copper coat hubs
  • Check exterior and interior lighting and replace bulbs as necessary
  • Thorough inspection of undercar including steering and suspension to identify any defects or fluid leakage and report
  • Check wiper blade condition and washer operation, replace and adjust nozzles as necessary
  • Test brake fluid and report or replace under instruction
  • Test coolant for glycol content and age and replace under instruction
  • Inspect drive belt and pulley condition and report
  • Inspect engine air and cabin filters and replace as necessary
  • Stamp service booklet
  • Connect scanner to vehicle ECU to re-set service indicator and extract fault code data
  • Inspect and top up under bonnet fluids as necessary
  • If 100,000km service, recommend replacing transmission and diff oils
  • Add tyre shine, engine shine, battery terminal protector and window wash
  • Add injector cleaner
  • Test drive, re-inspect under bonnet levels and under car for any leaks or faults
  • 19. Vacuum interior and wipe down dash

Inspection 2 Service Schedule

  • Inspect service booklet for replacements due ie: filters, timing belts etc.
  • Replace engine oil and filter
  • Rotate wheels, re-set tyre pressures including spare and clean wheels.
  • Clean down and inspect brake linings for percentage remaining and brake hose condition
  • Measure rotor thickness and report. Clean and copper coat hubs.
  • Check exterior and interior lighting and replace bulbs as necessary.
  • Thorough inspection of undercar including steering and suspension to identify any defects or fluid leakage and report
  • Check wiper blade condition and washer operation, replace and adjust nozzles as necessary
  • Test brake fluid and report or replace if older than 2 years
  • Test coolant for glycol content and age and replace when older than 2 years
  • Inspect drive belt and pulley condition and replace as necessary
  • Replace engine air and cabin filters
  • Replace fuel filter at 40,000 km intervals or 2 years
  • Replace spark plugs at 40,000 km intervals or platinum at 80,000 km intervals
  • Stamp service booklet
  • Connect scanner to vehicle ECU to re-set service indicator and extract fault code data
  • Inspect and top up under bonnet fluids as necessary
  • If 100,000km service replace transmission/gearbox and diff oils and remote key battery
  • Add tyre shine, engine shine, battery terminal protector & window wash
  • Lubricate door hinges and latch assemblies
  • Lubricate window rubbers with silicon spray
  • Add injector cleaner
  • Test drive, re- inspect under bonnet levels and under car for any leaks or faults
  • Vacuum interior & wipe down dash